OUP retaining set
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-FBH-C | Safety harness. • one D-shaped dorsal ring made of high-strength steel • adjustable straps on the chest, arms and thighs • seat belts • 44 ±1 mm wide tape made of polyester • sewing made with black polyamide threads, resistant to stretching |  |  |  | |
 | OUP-KRM-WPLR | A cable that fixes the position during work. • the ends of the rope are braided and covered with a protective polyethylene sleeve • loop equipped with an abrasion-resistant cap • rope length adjustable up to 2 m max. using a ring adjusting element |  | | | |
OUP standard set for use in industry
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-EAFRL | Safety shock absorber. • length: 1.5 m • double Y-shaped cuff • rope turnbuckle equipped with an energy absorber • the ends of the rope are sewn and covered with a protective polyethylene sleeve |  | | | |
 | OUP-KRM-FBH-V | Safety harness with harness for sitting position. • two D-shaped rings - pectoral and dorsal - made of high-strength steel • two D-shaped side rings on the waist for positioning • one D-shaped front ring at waist level for access to the rope |  | | | |
OUP set to work on scaffolding
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
| OUP-KRM-EAFRL | Safety shock absorber. • length: 1.5 m • double Y-shaped cuff • rope turnbuckle equipped with an energy absorber • the ends of the rope are sewn and covered with a protective polyethylene sleeve | | | | |
| OUP-KRM-FBH-C | Safety harness. • one D-shaped dorsal ring made of high-strength steel • adjustable straps on the chest, arms and thighs • seat belts • 44 ±1 mm wide tape made of polyester • sewing made with black polyamide threads, resistant to stretching | | | | |
OUP Kit for cleaning windows
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-EARL-B | Safety shock absorber. • length: 1.5 m • lanyard with energy absorber • rope ends braided and covered with a protective polyethylene sleeve • abrasion-resistant cap • rope with a carabiner on both sides | | | | |
 | OUP-KRM-FBH-PSBS | Safety harness. • one D-shaped dorsal ring to prevent falling • adjustable thigh straps • shoulder straps without adjustment • 44±1 mm wide belt made of polyester • sewing thread made of highly tensile-resistant polyamide in white | | | | |
 | OUP-KRM-K-SL | Steel connector with screw lock. • opening 18 mm • oval connector made of round rods • connector with automatic closing and manual lock • system strength greater than 25 kN • meets the requirements of the EN362 standard |  | | | |
OUP survival kit
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-FAA | Self-locking device with flexible guide. • equipped with a steel carabiner to connect to the user's harness • moving rope gripper with flexible mounting • moves when the user moves up or down and locks in the event of a fall |  | | | |
| OUP-KRM-FBH-V | Safety harness with harness for sitting position. • two D-shaped rings - pectoral and dorsal - made of high-strength steel • two D-shaped side rings on the waist for positioning • one D-shaped front ring at waist level for access to the rope | | | | |
| OUP-KRM-K-SL | Steel connector with screw lock. • opening 18 mm • oval connector made of round rods • connector with automatic closing and manual lock • system strength greater than 25 kN • meets the requirements of the EN362 standard | | | | |
 | OUP-KRM-RAL1420 | Connection rope. • length: 20 m • one end of the rope is braided and covered with a protective polyethylene sleeve, finished with a loop, the other end with a locking knot and a loop |  | | | |
 | OUP-KRM-WPLG | Rope with a self-clamping device, securing positions during work. • length: 2 m • the ends of the rope are braided and covered with a protective polyethylene sleeve • loop equipped with an abrasion-resistant cap • a carabiner on one side of the rope | | | | |
OUP descent set
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
| OUP-KRM-FBH-V | Safety harness with harness for sitting position. • two D-shaped rings - pectoral and dorsal - made of high-strength steel • two D-shaped side rings on the waist for positioning • one D-shaped front ring at waist level for access to the rope | | | | |
 | OUP-KRM-RFAB10 | Self-locking device. • durable and massive plastic housing • lashing eye at the appropriate end for fastening • steel swivel hook at the extendable end of the mechanism (possibility of obtaining a simple steel swivel hook or a swivel hook with load indicator) |  | | | |
 | OUP-KRM-TRIPOD | Safety tripod. • height adjustable from 1.15 m to 2.15 m above ground level • at minimum height, distance between supports: 0.8 m • at maximum height, distance between supports: 1.5 m • adjustment using telescopic supports (inside and outside) |  | | | |
 | OUP-KRM-WINCH | Lifting and lowering device. • a winch used to pull in people or material • mounting plate equipped with four screws for mounting to tripod supports or other base as required • galvanized steel cable with a diameter of 5.00 mm and a maximum length of 20 m |  | | | |
OUP protective set 1
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-EARL-C | Safety shock absorber. • length: 1.5 m • lanyard with energy absorber • rope ends braided and covered with a protective polyethylene sleeve • abrasion-resistant cap • a carabiner on one side and a steel eye hook for scaffolding on the other side | | | | |
 | OUP-KRM-FBH-A | Safety harness. • one D-shaped dorsal ring made of high-strength steel • adjustable straps on the thighs and chest • seat belts • 44 ±1 mm wide tape made of polyester • meet the requirements of the EN361 standard | | | | |
| OUP-KRM-K-SL | Steel connector with screw lock. • opening 18 mm • oval connector made of round rods • connector with automatic closing and manual lock • system strength greater than 25 kN • meets the requirements of the EN362 standard | | | | |
 | OUP-KRM-WL-A | Tape safety line. • length: 1.5 m • 44 mm wide polyester belt with textile loops • textile fastening loop on one side, the other side finished with a steel snap hook • sewing thread made of highly tensile-resistant polyamide |  | | | |
OUP protective set 2
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-EABRLWSH | Safety shock absorber. • length: 1.5 m • rope ends sewn and covered with a protective polyethylene sleeve • on one side there is an energy absorber with a loop, the other side is equipped with a steel eye hook for scaffolding | | | | |
| OUP-KRM-FBH-A | Safety harness. • one D-shaped dorsal ring made of high-strength steel • adjustable straps on the thighs and chest • seat belts • 44 ±1 mm wide tape made of polyester • meet the requirements of the EN361 standard | | | | |
 | OUP-KRM-RL-B | Safety rope for working with support. • length: 1.5 m • rope ends braided and covered with a protective polyethylene sleeve • abrasion-resistant cap • a carabiner on both sides of the rope | | | | |
OUP protective set 3
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-FAB | Self-locking device with a flexible guide equipped with an energy absorber. • equipped with a shock absorber and a steel carabiner to connect to the user's harness • moving rope gripper with flexible mounting | | | | |
| OUP-KRM-FBH-V | Safety harness with harness for sitting position. • two D-shaped rings - pectoral and dorsal - made of high-strength steel • two D-shaped side rings on the waist for positioning • one D-shaped front ring at waist level for access to the rope | | | | |
| OUP-KRM-RAL1420 | Connection rope. • length: 20 m • one end of the rope is braided and covered with a protective polyethylene sleeve, finished with a loop, the other end with a locking knot and a loop | | | | |
OUP protective set 4
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-FBH-B | Safety harness. • one D-shaped dorsal ring made of high-strength steel • two front textile loops • adjustable straps on the chest and thighs • seat belts • 44 ±1 mm wide tape made of polyester • sewing made with black polyamide threads, resistant to stretching | | | | |
| OUP-KRM-WPLR | A cable that fixes the position during work. • the ends of the rope are braided and covered with a protective polyethylene sleeve • loop equipped with an abrasion-resistant cap • rope length adjustable up to 2 m max. using a ring adjusting element | | | | |
OUP protective set 5
| Product | Description | Norms | Line | Brand | For industries | |
|---|---|---|---|---|---|---|
 | OUP-KRM-EAWLWH | Safety shock absorber. • length: 1.5 m • stripper with energy absorber • on one side of the tape there is an energy absorber with a carabiner, on the other side there is a steel eye hook for scaffolding | | | | |
| OUP-KRM-FBH-C | Safety harness. • one D-shaped dorsal ring made of high-strength steel • adjustable straps on the chest, arms and thighs • seat belts • 44 ±1 mm wide tape made of polyester • sewing made with black polyamide threads, resistant to stretching | | | | |